SETTING UP J.Q.L. HORSE FORM LITE FOR WINDOWS
	     Copyright 1993 John Q. Lavelle

First you need to set up Horse Form Lite to run on your computer.

Microsoft Windows version 3.1 or greater (from now on referred to
as Windows) must be installed on your computer.  For information
on installing and using Windows, please see your Windows
documentation.

Switch on your computer and monitor.

FROM DOS

1. Insert the Horse Form Lite program disk into your floppy
   disk drive (if you are using a 5 1/4 inch disk or a drive
   that has a door, then close the door).

2. Type  A:\SETUP    then press ENTER
   (If you are using a different drive to drive "A:", then
   type the correct drive letter instead of "A:".  e.g. if
   you are using drive "B:", then type  B:\SETUP  and press
   ENTER.)

3. Windows will load automatically and start running and the
   installation window is displayed. Select the options that
   best match your system requirements.

4. Horse Form Lite will create its own Program Group in your
   Program Manager Window.

FROM WINDOWS

1. Start Windows. If windows is not running, type  WIN  at 
   the command prompt (the  C:>  prompt) and press ENTER.

2. Open the Windows Program Manager window. If the Windows
   Program Manager window is not open, then double-click on
   the Program Manager icon, (or press CTRL+ESC to display
   the Windows Task List, then press the DOWN ARROW or UP
   ARROW key until the Program Manager item is highlighted,
   then press ENTER).

3. Insert the Horse Form Lite program disk into your floppy
   disk drive (if you are using a 5 1/4 inch disk or a drive
   that has a door, then close the door).

4. From the Program Manager window, click on the word FILE
   to open the menu and click on RUN, (or press ALT+F, and
   press the R key).

5. In the Command Line box, type   A:\SETUP .
   (If you are using a different drive to drive A:, then
   type the correct drive letter instead of "A:".  e.g. If
   you are using drive B:, then type  B:\SETUP.)

6. Click on the OK button or press ENTER.

7. Once the Setup Program has loaded, a series of instructions
   is displayed on your screen, just select the options which
   best match your system and requirements.

8. Horse Form Lite will create its own Program Group in your
   Program Manager window.

NOTES

   Check your \WINDOWS\SYSTEM directory for the file VBRUN300.DLL,
   be careful as you may have files with very similar names (i.e.
   vbrun100.dll or vbrun200.dll). If VBRUN300.DLL is not in your
   \WINDOWS\SYSTEM directory you must copy it from the J.Q.L.
   Horse Form Lite distribution disk to your \WINDOWS\SYSTEM
   directory. For more information on copying files see your
   Windows documentation or use this example.

   COPY C:\JQLHFL\VBRUN300.DLL C:\WINDOWS\SYSTEM\VBRUN300.DLL

   No manual is supplied on the disk because the Help file is
   always more up to date and is recompiled every time there is a
   change in the program. If you require a manual, then print out
   the help file by selecting each section in turn and pressing
   the PRINT button which is next to the browse buttons on the
   Help file's menu bar.

   If you experience any problems with any aspect of J.Q.L. Horse
   Form Lite, telephone 0900 870833 (or international
   +44 900 870833) or leave a message on CompuServe 73062,2642.